Exploring the Exopolysaccharide Production Potential of Bacterial Strains Isolated from Tunisian Blue Crab Portunus segnis Microbiota.

The blue crab (BC) Portunus segnis is considered an invasive species colonizing Tunisian coasts since 2014. This work aims to explore its associated bacteria potential to produce anionic exopolysaccharides (EPSs) in order to open up new ways of valorization. In this study, different BC samples were collected from the coastal area of Sfax, Tunisia. First, bacterial DNA was extracted from seven different fractions (flesh, gills, viscera, carapace scraping water, and three wastewaters from the production plant) and then sequenced using the metabarcoding approach targeting the V3-V4 region of the 16S rDNA to describe their microbiota composition. Metabarcoding data showed that the dominant bacterial genera were mainly Psychrobacter, Vagococcus, and Vibrio. In parallel, plate counting assays were performed on different culture media, and about 250 bacterial strains were isolated and identified by sequencing the 16S rDNA. EPS production by this new bacterial diversity was assessed to identify new compounds of biotechnological interest. The identification of the bacterial strains in the collection confirmed the dominance of Psychrobacter spp. strains. Among them, 43 were identified as EPS producers, as revealed by Stains-all dye in agarose gel electrophoresis. A Buttiauxella strain produced an EPS rich in both neutral sugars including rare sugars such as rhamnose and fucose and uronic acids. This original composition allows us to assume its potential for biotechnological applications and, more particularly, for developing innovative therapeutics. This study highlights bacterial strains associated with BC; they are a new untapped source for discovering innovative bioactive compounds for health and cosmetic applications, such as anionic EPS.

Effect of glucose substitution by low-molecular weight chitosan-derivatives on functional, structural and antioxidant properties of maillard reaction-crosslinked chitosan-based films.

In this study, the effects of different temperatures, incubation times and types of reducing sugars, including glucose and different low molecular weight (Mw) chito-oligosaccharides (COS) with varying acetylation degree (AD), on the extent of Maillard reaction (MR) on chitosan-based films were studied. Interestingly, an improvement of structural and functional properties of all MR-crosslinked films was noted, which is more pronounced by heating at higher temperature and exposure time. These findings were proved through Fourier-transform infrared and X-ray diffraction analyses. In addition, color change and Ultraviolet spectra demonstrate that glucose addition provides the high extent of MR, followed by COS1 (Mw < 4.4 kDa; AD, 18.20%) and COS2 (Mw < 4.4 kDa; AD, 10.63%). These results were confirmed by enhanced water resistance and thermal properties. Moreover, MR-chitosan/COS films showed the highest mechanical properties, whereas, glucose-loaded films were brittle, as demonstrated by scanning electron microscopy micrographs. Furthermore, MR-chitosan/COS1 films exhibited the better antioxidant behavior followed by chitosan/glucose and chitosan/COS2 films, mainly at higher heating-conditions. Thereby, MR-crosslinked chitosan/COS based films were attractive to be applied as functional and active coating-materials in various fields.

Chitosan derivatives-based films as pH-sensitive drug delivery systems with enhanced antioxidant and antibacterial properties.

The purpose of this study was to develop and characterize chitosan (Ch)-based films incorporated with varying molecular weight (Mw) and acetylation degree (AD) chitosan-depolymerization-products (CDP), to be applied as drug delivery materials. As compared to Ch-film, optical and antioxidant potentials of Ch/CDP-based films were improved, particularly using low Mw and AD-CDP. Whereas, films water resistance, mechanical and antibacterial properties increased as CDP-Mw increased and AD decreased. For the thermal and swelling behaviors, better values were obtained using higher Mw and AD-CDP. Further, to assess their in vitro ciprofloxacin (CFX)-release behavior, loaded-CFX Ch/CDP-based films, crosslinked using glutaraldehyde, were prepared. Expect of elongation at break, crosslinked CFX-loaded films showed increased optical, water resistance, tensile strength and thermal properties, as compared to unloaded films. The CFX-release profiles indicated that a slower and sustained release was observed, particularly when using lower Mw and AD-CDP, and mainly for the crosslinked films during 48 h. These films can release CFX for up to 54% in 6 and 24 h, at pH 1.2 and 7.4, respectively. Through this study, novel biodegradable, swellable and pH-sensitive crosslinked Ch/CDP-based films may be considered as suitable and promising drug delivery systems.

A Novel Digestive α-Amylase from Blue Crab (Portunus segnis) Viscera: Purification, Biochemical Characterization and Application for the Improvement of Antioxidant Potential of Oat Flour.

This study reports on the purification and characterization of a digestive α-amylase from blue crab (Portunussegnis) viscera designated Blue Crab Amylase (BCA). The enzyme was purified to homogeneity by ultrafiltration, Sephadex G-100 gel filtration and Sepharose mono Q anion exchange chromatography, with the final purification fold of 424.02, specific activity of 1390.8 U mg-1 and 27.8% recovery. BCA, showing a molecular weight of approximately 45 kDa, possesses desirable biotechnological features, such as optimal temperature of 50 °C, interesting thermal stability which is enhanced in the presence of starch, high stability towards surfactants (Tween 20, Tween 80 and Triton X-100), high specific activity, quite high storage and broad pH range stability. The enzyme displayed Km and Vmax values, of 7.5 ± 0.25 mg mL-1 and 2000 ± 23 µmol min-1 mg-1 for potato starch, respectively. It hydrolyzed various carbohydrates and produced maltose, maltotriose and maltotetraose as the major end products of starch hydrolysis. In addition, the purified enzyme was successfully utilized for the improvement of the antioxidant potential of oat flour, which could be extended to other cereals. Interestingly, besides its suitability for application in different industrial sectors, especially food industries, the biochemical properties of BCA from the blue crab viscera provide novel features with other marine-derived enzymes and better understanding of the biodegradability of carbohydrates in marine environments, particularly in invasive alien crustaceans.

Effect of glucose-induced Maillard reaction on physical, structural and antioxidant properties of chitosan derivatives-based films.

This work focused on studying the physicochemical and antioxidant properties changes of varying molecular weight (Mw) chitosan-depolymerization products (CDP)-based films occurring after crosslinking by heat-treatment and Maillard reaction (MR). Based on color properties and browning index, an enhancement of films properties was observed after treatment at 90 °C with a reduction in their water content, solubility and contact angle. Brown MR products were developed in heated films containing glucose thus improving their barrier properties. This effect was more pronounced in lower Mw-CDP based films. In addition, according to TGA, EAB and TS analyses an improvement in heat-treated films thermal stability and mechanical properties was detected and further confirmed through FTIR, X-ray and SEM analyses. The evaluation of the antioxidant potential through four different assays allowed to conclude that glucose addition, thermal treatment and the use of low Mw-CDP highly enhanced the MR-modified films antioxidant capacity. Consequently, MR crosslinked chitosan-based films could be potentially used as an alternative for bioactive and functional packaging effective in food oxidation inhibition, especially using low Mw chitosan derivatives.

Controlled size green synthesis of bioactive silver nanoparticles assisted by chitosan and its derivatives and their application in biofilm preparation.

The aim of this work was to explore the effect of various molecular weight (Mw) chitosan depolymerization products (CDP) on the silver nanoparticles (AgNPs) and chitosan/AgNPs blend films production. Produced AgNPs, stable during 30 days in a colloïdal form, were characterized in terms of UV-vis, transmission electron microscopy (TEM), dynamic light scattering (DLS) and fourier transform infrared spectroscopy (FTIR) analyses. AgNPs displayed interesting antibacterial and antioxidant properties that were affected by the physicochemical properties of used chitosans. Interestingly, CDP may be used for the preparation of bioactive and stable AgNPs. Additionally, chitosan/AgNPs blend films were prepared and characterized in terms of physiochemical and biological properties. As compared to the chitosan film, various properties were enhanced in the chitosan/AgNPs blend films, including light barrier, opacity, elongation at break, as well as bioactivities, thus suggesting that films could be used as novel alternative food packaging applications.

Enzymatic production of low-Mw chitosan-derivatives: Characterization and biological activities evaluation.

This study reports the enzymatic depolymerization of chitosan by the chitosanolytic preparation of Bacillus licheniformis GA11. For this purpose, chitosanase production and biochemical characterization of the crude enzyme preparation from GA11 were firstly investigated. The highest chitosanase production was obtained in a culture medium containing 50.0 g/l of a mixture of soluble starch/shrimp shells/crab shells and 5.0 g/l tryptone, after incubation during 5 days, at 30 °C with a pHi of 6.0 and under continuous agitation at 200 rpm. Then, the chitosanolytic preparation, exhibiting maximum activity at 65 °C and pH 5.0, was used to hydrolyze chitosan, leading to various chitosan-depolymerization products (CDP) with different physicochemical characteristics. Finally, the antioxidant and antimicrobial potentials of CDP were evaluated, allowing to conclude that the molecular weight and the acetylation degree highly affect the biological activities of CDP.

Preparation of a crude chitosanase from blue crab viscera as well as its application in the production of biologically active chito-oligosaccharides from shrimp shells chitosan.

In this study, a digestive chitosanase from blue crab (Portunus segnis) viscera was extracted, characterized and applied. The crude chitosanase showed optimum activity at pH 4.0 and 60 °C and retained >80% of its activity over a pH range from 3.0 to 10.0. Subsequently, the crude chitosanase was applied to produce bioactive varying molecular weight (Mw) and acetylation degree chitosan-depolymerization products (CDP) with specially sequences composition determined by MALDI-TOF MS owing to an endo-cleavage mode. This hydrolysis process allowed to the preparation, after 24 h of incubation at 40 °C, of a low Mw water soluble CDP (H 24h, <4.4 kDa) with DP up to 6 and a high Mw CDP (C 24h, 142.19 kDa). Following their physicochemical characterization, the functional properties, antioxidant and antimicrobial activities of CDP were investigated. Interestingly, as compared to the native chitosan, CDP, especially low Mw derivatives (H 24h) exhibited potent antioxidant activities, while high Mw derivatives, especially C 24h, markedly inhibited the growth of all tested bacteria and fungi. These results may provide novel insights into the efficiency of chitosan depolymerisation using the Portunus segnis digestive crude chitosanase as a simple, inexpensive and easily method to produce bioactive chitosan-derivatives and that this bioactivity depends highly on their attractive characteristics.

Antioxidant, antibacterial and in vivo wound healing properties of laminaran purified from Cystoseira barbata seaweed.

Laminaran, a polysaccharide extracted from marine algae, exhibits attractive properties being non-toxic, hydrophilic and biodegradable. The aim of this study was to investigate the effectiveness of a cream based on the brown seaweed Cystoseira barbata laminaran (CBL) for healing full thickness wounds induced on rats. The antibacterial activity of CBL was evaluated against Gram positive and Gram negative bacteria and the antioxidant properties were assessed using five different assays. To highlight the healing effectiveness of CBL-based cream, the response to treatment was assessed by macroscopic, histologic and biochemical parameters and was compared to controls. CBL, recovered (7.27%) by ultrafiltration (1-10 kDa) and predominantly consisted of (1 → 3)-linked ß-d-glucopyranose residues with a small level of (1 → 6)-glycosidic bonds, showed noticeable antioxidant and antibacterial properties. The cream containing CBL as an active ingredient exerted a promoting healing effect. The wound contraction reached 98.57 ±â€¯1.31% after thirteen days of treatment. The derma in CBL treated group is properly arranged and revealed an improved collagen deposition and an increased fibroblast and vascular densities compared with the control groups. Overall, these results established, for the first time, a scientific in vivo evidence of the efficiency of CBL as a wound healing agent of interest in modern medicine.

Depolymerization of Pseudomonas stutzeri exopolysaccharide upon fermentation as a promising production process of antibacterial compounds.

Many researchers have focused on high molecular weight (Mw) exopolysaccharides (EPS) as a source of potentially bioactive lower Mw derivatives. Therefore, it is of interest to find means for efficient and safe production of depolymerized-polymer derivatives. Exopolysaccharide-depolymerization products (EDP) varying in molecular weight were recovered from fermentative depolymerization of a native EPS produced by Pseudomonas stutzeri AS22. Following their purification and physicochemical characterization, the antibacterial activity of EDP on food spoilage and food poisoning microorganisms was evaluated through the measurement of the inhibition zone diameter, the half maximal (IC50) and the minimal (MIC) inhibitory concentrations. Our results indicate that the lower the Mw, the higher will be the effectiveness of EDP on reducing Gram-negative bacteria growth and the opposite trend was observed in the case of Gram-positive bacteria. EDP bioactivities may provide novel insights into the potentiality of P. stutzeri EPS and its derivatives to be used as functional-food components.

Structure, functional and antioxidant properties in Tunisian beef sausage of a novel polysaccharide from Trigonella foenum-graecum seeds.

A novel polysaccharide named Fenugreek Water-Soluble Polysaccharide (FWSP), consisting of a gluconic acid polymer, was isolated from fenugreek seeds. It was structurally characterized by Fourier transformed infrared (FT-IR), X-ray diffraction (XRD), High performance liquid chromatograpy (HPLC), and Nuclear magnetic resonance (NMR) spectroscopies. FT-IR and NMR spectra showed the characteristic bands of polysaccharides. According to XRD spectrum, FWSP is a semi-crystalline polymer. Functional properties of FWSP were investigated based on Water Holding Capacity (WHC), Oil Holding Capacity (OHC), emulsification activity, and foaming ability. FWSP was capable of emulsifying several food-grade oils and hydrophobic compounds, especially corn oil and hexane. The effects of FWSP on oxidative processes in beef sausages during refrigerated (4°C) storage was investigated. The results showed significant inhibition (p<0.05) of lipid and myoglobin oxidation and provided evidence that FWSP is a potent and useful antioxidant for maintaining storage stability of beef sausages, and could replace vitamin C currently used as antioxidant in industry process.

Structural analysis, and antioxidant and antibacterial properties of chitosan-poly (vinyl alcohol) biodegradable films.

The development and characterization of biodegradable blend films based on chitosan and poly (vinyl alcohol) for possible use in a variety of biological activities are reported. Fourier transform infrared spectroscopy (FTIR) spectra of chitosan-poly (vinyl alcohol) (Ch/PVA) films showed characteristics peaks shifting to a lower frequency range due to hydrogen bonding between -OH of PVA and -NH2 of chitosan. The chitosan and PVA polymers presented good compatibility. The morphology study of chitosan and composite films showed a compact and homogenous structure. The tensile strength and elongation at break increased with PVA content. In fact, the highest tensile strength and elongation at break (53.58 MPa and 454 %) occurs with pure PVA film. The results showed that PVA incorporation in the blends contributes to increase the intermolecular interactions, thus improving the mechanical properties. In addition, the prepared films demonstrated high antioxidant activities monitored by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging, reducing power, and ß-carotene bleaching activity. Nevertheless, PVA addition reduced antioxidant and antibacterial activities against Gram-positive and Gram-negative bacteria tested.

Structural, physicochemical and antioxidant properties of sodium alginate isolated from a Tunisian brown seaweed.

An original sodium alginate from Tunisian seaweed (Cystoseira barbata) was purified and characterized by circular dichroism (CD) and ATR-FTIR spectroscopies. ATR-FTIR spectrum of C. barbata sodium alginate (CBSA) showed the characteristic bands of mannuronic (M) and guluronic acids (G). The M/G ratio was estimated by CD (M/G = 0.59) indicating that CBSA was composed of 37% mannuronic acid and 63% guluronic acid. The analysis of viscosity of CBSA showed evidence of pseudoplastic fluid behaviour. The emulsifying capacity of CBSA was evaluated at different concentrations (0.25-3%), temperatures (25-100 °C) and pH (3.0-11.0). Compared to most commercial emulsifiers, the emulsion formulated by CBSA was found to be less sensitive to temperature changes and more stable at acidic pH. CBSA was examined for antioxidant properties using various antioxidant assays. CBSA exhibited important DPPH radical-scavenging activity (74% inhibition at a concentration of 0.5 mg/ml) and considerable ferric reducing potential. Effective hydroxyl-radical scavenging activity (82% at a concentration of 5 mg/ml) and potent protection activity against DNA breakage were also recorded for CBSA. However, in the linoleate-ß-carotene system, CBSA exerted moderate antioxidant activity (60% at a concentration of 1.5 mg/ml). Therefore, CBSA can be used as a natural ingredient in food industry or in the pharmaceutical field.

Isolation and biochemical characterisation of a bacteriocin-like substance produced by Bacillus amyloliquefaciens An6.

This study focuses on the isolation and characterisation of a peptide with bacteriocin-like properties from Bacillus amyloliquefaciens An6. Incubation conditions were optimised, and the effects of the incubation period and of carbon and nitrogen sources were investigated. The produced bacteriocin was partially purified with ammonium sulphate precipitation, dialysis and ultrafiltration and was then biochemically characterised. Maximum bacteriocin production was achieved after 48h of incubation in a culture medium containing 20g/L starch and 10g/L yeast extract, with an initial pH 8.0 at 30°C under continuous agitation at 200rpm. The bacteriocin was sequentially purified and its molecular weight was determined to be 11kDa by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE). The bacteriocin was relatively heat-resistant and was not sensitive to acid and alkaline conditions (pH 4.0-10.0). Its inhibitory activity was sensitive to proteinase K but was resistant to the proteolytic action of alcalase, trypsin, chymotrypsin and pepsin. In conclusion, bacteriocin An6, owing its wide spectrum of activity as well as its high tolerance to acidic and alkaline pH values, temperature and proteases shows great potential for use as a food biopreservative.

Rhelogical, dermal wound healing and in vitro antioxidant properties of exopolysaccharide hydrogel from Pseudomonas stutzeri AS22.

The in vitro antioxidant activity and the in vivo wound healing performance of the exopolysaccharide EPS22, produced by Pseudomonas stutzeri AS22, were investigated. Antioxidant activity was evaluated by three different tests. The scavenging effect on DPPH radicals at a concentration of 1mg/ml was 80±1.41%. The reducing power reached a maximum of 1.26±0.02 at 2 mg/ml. Moreover, EPS22 showed good chelating ability and chelated almost 88.5±0.7% of ferrous ions at 0.75 mg/ml. The rheological characterization of EPS22 gel (0.5%) showed a pseudoplastic behavior, high elasticity, good mechanical strength and stability with high water-absorption ability. The application of the EPS22 gel on dermal full-thickness excision wounds in a rat model every two days, enhanced significantly wound healing activity and a total closure was achieved after 12 days of wound induction. Further, histological examination of biopsies showed advanced tissue regeneration, characterized by the presence of well-organized stratum of both derma and epidermis.

Purification and structural data of a highly substituted exopolysaccharide from Pseudomonas stutzeri AS22.

Pseudomonas stutzeri AS22, when grown on media containing starch and yeast extract and incubated at 30 °C and 200 rpm for 24h, was found to produce an acidic and high-molecular mass exopolysaccharide (EPS22). The EPS22 was purified and a yield of 1.3g/l was achieved. The average molecular mass of the EPS22 was determined by high-performance size-exclusion chromatography (HPSEC) and showed an average molecular mass of 9.9 × 10(5)Da and a polydispersity index Mw/Mn (Mw, weight-average and Mn, number-average) of 1.197 ± 0.015. Structural data of this EPS22 were determined using a combination approach including monosaccharide composition (HPAEC-PAD and GLC), methylation analysis (GC-MS) and NMR spectroscopy analysis. EPS22 was found to be a complex heteropolysaccharide with a repeating unit mainly composed of glucose, mannose and lactyl rhamnose in a molar ratio of 1:1.1:0.7. The acidic nature of the polysaccharide is due to the presence of three non-osidic substituents consisting of a lactyl, acetyl, and pyruvyl groups.

Production and biochemical characterization of a high maltotetraose (G4) producing amylase from Pseudomonas stutzeri AS22.

Amylase production and biochemical characterization of the crude enzyme preparation from Pseudomonas stutzeri AS22 were evaluated. The highest α-amylase production was achieved after 24 hours of incubation in a culture medium containing 10 g/L potato starch and 5 g/L yeast extract, with initial pH 8.0 at 30°C under continuous agitation at 200 rpm. The optimum temperature and pH for the crude α -amylase activity were 60°C and 8.0, respectively. The effect of different salts was evaluated and it was found that both α -amylase production and activity were Ca(2+)-dependent. The amylolytic preparation was found to catalyze exceptionally the formation of very high levels of maltotetraose from starch (98%, w/w) in the complete absence of glucose since the initial stages of starch hydrolysis (15 min) and hence would have a potential application in the manufacturing of maltotetraose syrups.

Chitin extraction from shrimp shell waste using Bacillus bacteria.

The ability of six protease-producing Bacillus species (Bacillus pumilus A1, Bacillus mojavencis A21, Bacillus licheniformis RP1, Bacillus cereus SV1, Bacillus amyloliquefaciens An6 and Bacillus subtilis A26) to ferment media containing only shrimp shell waste, for chitin extraction, was investigated. More than 80% deproteinization was attained by all the strains tested. However, demineralization rates not exceeding 67% were registered. Cultures conducted in media containing shrimp shell waste supplemented with 5% (w/v) glucose were found to remarkably promote demineralization efficiency, without affecting deproteinization rates. The antioxidant activities of hydrolysates, at different concentrations, produced during fermentation in medium supplemented with glucose, were determined using different tests: 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging method, reducing power assay and chelating activity. All hydrolysates showed varying degrees of antioxidant activity. Hydrolysate produced by B. pumilus A1 exhibited the highest DPPH radical scavenging activity, with an IC(50) value of 0.3 mg/ml. Highest reducing power (DO 700 nm=1.55 at 1.5 mg/ml) and metal chelating activity (98% at 5mg/ml) were obtained with B. pumilus A1 and B. licheniformis RP1 hydrolysates, respectively.

Shrimp waste fermentation with Pseudomonas aeruginosa A2: optimization of chitin extraction conditions through Plackett-Burman and response surface methodology approaches.

A Box-Bhenken design with four variables (shrimp shell concentration (SSC), glucose concentration, incubation time and inoculum size) and three levels was used for the determination of the deproteinization and demineralization efficiencies in fermented shrimp shells by Pseudomonas aeruginosa A2. The fermentation variables were selected in accordance with Plackett-Burman design. Maximum demineralization of 96%, with about 89% of protein removal occurs under the following conditions: SSC 50 g/l, glucose 50 g/l, 5 days and inoculum of 0.05 OD. This environment friendly method (biological treatment) can be considered as an effective pretreatment to produce a high-quality chitin.

A novel alpha-amylase from Bacillus mojavensis A21: purification and biochemical characterization.

alpha-Amylase from Bacillus mojavensis A21 (BMA.2) was purified to homogeneity by ultrafiltration, Sephadex G-75 gel filtration and Sepharose mono Q anion exchange chromatography, with a 15.3-fold increase in specific activity and 11% recovery. The molecular weight of the BMA.2 enzyme was estimated to be 58 kDa by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and gel filtration. The optimum temperature and pH were 80 degrees C and 6.5, respectively. BMA.2 belonged to the EDTA-sensitive alpha-amylase, but its activity was not stimulated by the presence of Ca2+ ions. The major end-products of starch hydrolysis were maltohexaose, maltopentaose and maltotriose. The N-terminal amino acid sequence of the first ten amino acids of the purified alpha-amylase was ASVNGTLMQY. Compared to sequences of other amylases, the ten amino acid sequence contains Val at position 3, while amylases from Bacillus licheniformis NH1 and Bacillus sp. SG-1 have Leu and Thr at position 3, respectively.